Isenberg 196.4301MB 3/4x22 Thermostatic Valve with 3-Way Diverter and Trim Matte Black

Description

TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The top handle is capable of controlling the volume of water from full flow to a trickle. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The bottom handle sets the temperature. With the help of this ring, the temperature of the water is regulated. VALVE INSTALLATION – As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77” and 3.44” inches [Rough In Spec]. CUT OUT DIMENSIONS – The cut out in wall should be 6.49” x 4.44” Inches which is properly covered by the trim plate. The diverter handle on the top diverts the flow from each of the three outputs of the valve. The top handle controls water diversion between the 3 water output ports. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly. HANDLE OPERATION – The bottom handle is used to control the temperature of water flowing through the outlet. This will ensure that the trim plate will cover the cut out hole in the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.

Key Features

• TRIMS – The trims comprise of a well-finished cover plate and handle knobs.
• The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.
• ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value.
• VALVE INSTALLATION – As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77” and 3.44” inches [Rough In Spec].
• Isenberg 3/4′′ Thermostatic Valve with 3-Way Diverter and Trim 196.4301 Product Description SPECIFICATIONS: Solid Brass Valve & Trim Includes Thermostatic Valve Diverts water between 3 outlets.
• The top handle controls water diversion between the 3 water output ports.